Telescopic masts
F
- Special procedure
4.3 -
UNLOADING
Before operating, check that the machine is in good condition.
the damage must be assessed by a competent person to decide wether the machine can be operated. The
transport company must also be advised of the damage in writing.
1.
The machine is completely stowed.
2.
Remove the tie downs.
3.
Start the machine.
4.4 -
WARNING
To unload the machine, select low driving speed
Do not travel down the ramp at a fast speed.
5 - Detection of internal fault
5.1 -
PRINCIPLE
For : STAR 6 (STAR 13) - STAR 6 P - STAR 8 - STAR 10
The machine is equipped with an internal fault detection system.
The code displayed on the hour recorder ( 91 ) shows the user what kind of fault has occurred.
According to the type of fault, the machine switches to DOWNGRADED MODE; certain
movements can be limited or forbidden by the system to maintain the operator's safety.
5.2 -
PROCEDURE
1.
Stow the machine.
2.
Switch the machine off.
Do not use the machine until the fault has been repaired.
Perform the required maintenance (see the machine maintenance book).
80
2420343790
.
e10.11
AUS