System Configuration - Renesas Emulation Probe M306V8T-EPB User Manual

M306V8T-EPB User's Manual

1.3 System Configuration

1.3.1 System Configuration
Figure 1.1 shows a configuration of the M306V8T-EPB system.
(4) Host machine
LPT parallel, USB or LAN
interface
Figure 1.1 System configuration
(1) Emulation probe M306V8T-EPB
This is an emulation probe for the M16C/60 Series M16C/6V Group M306V8 MCUs and contains an evaluation MCU.
(2) Converter board M306V8T-PTC
This is a converter board for connecting to 116-pin 0.65-mm-pitch LQFP foot pattern on the user system. For details, refer
to "2.9 Connecting the User System" (page 30).
(3) Emulator main unit PC7501
The emulator main unit for the M16C family to be used with this product.
(4) Host machine
A personal computer to control the emulator.
(5) User system
This is your application system.
This emulator cannot supply the power to the user system. Therefore design your system so that the user system is powered
separately.
REJ10J0777-0100 Rev.1.00 2005.08.01
AC adapter
(3) Emulator PC7501
(1) Emulation probe
M306V8T-EPB
(2) Converter board
M306V8T-PTC
(5) User system
1. Outline
Page 15 of 90