Replacing The Gobo Rotation Timing Belt; Replacing The Gobo Wheel Motor - Martin Exterior Projection 500 Service Manual

Service manual
3. Disconnecting the connector (3).
4. Replace the gobo rotation motor.
5. Follow the procedure in reverse order.

Replacing the gobo rotation timing belt

1. Remove the gobo wheel. See "Replacing the
gobo wheel" on page 21.
2. Remove the gobo rotation motor. See "Replacing
the gobo rotation motor" on page 21.
3. Replace the gobo rotation timing belt (1).
NOTE! Push the motor to the side to tighten the
timing belt before you fasten the screws.
4. Follow the procedure in reverse order.

Replacing the gobo wheel motor

1. Remove the gobo wheel. See "Replacing the
gobo wheel" on page 21.
2. Remove the gobo rotation motor. See "Replacing
the gobo rotation motor" on page 21.
3. Remove the four Torx10 screws (1).
Exterior Projection 500 - Revision A, 12-19-2017
Figure 49: Disconnecting connector
Figure 50: Replacing the gobo wheel
1
1
Figure 51: Removing four Torx10 screws
3
1
22 of 32