Parmco VERSO X9F Installation And Operating Instructions Manual page 19

If the oven has been in use, let the oven cavity and the heating elements cool down before
attempting any maintenance.
Changing the bulb
Pull out the protective cover.

We recommend that you wash and dry the glass cover at this point.

Carefully remove the old bulb and insert the new bulb suitable for high temperatures (300ºC) having
the following specifications: 220-240V, 50Hz, 25W, G9 fitting.
Refit the protective cover.

IMPORTANT
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder. Remove only by hand
IMPORTANT
Never replace the bulb with bare hands as contamination from your fingers can cause premature failure. Always use a
clean cloth or gloves.
Please note:
The bulb replacement is not covered by your guarantee
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is possible to remove the door.
To do this, tilt the safety catch part of the hinge upwards. Close the door lightly, lift and pull it out towards you.
In order to fit the door back on to the cooker. Do the reverse. When fitting, ensure that the notch of the hinge
is correctly placed on the protrusion of the hinge holder. After the door is fitted to the oven, the safety catch
should be carefully lowered down again. If new the safety catch is not set it may cause damage to the range
when closing the door.
Tilting the hinge safety catches
18