Torque Current Regulator; Magnetizing Current Regulator; Flux Regulator; Phase Lock Loop - Siemens 6SR41 series Product User Manual

6.2.8

Torque Current Regulator

The Torque Current Regulator generates the motor's Q-axis motor voltage. The Torque
Producing Motor Current Reference (Iqs_ref) is generated from the output of the Frequency
Regulator. The Torque Producing Current Feedback (Iqs) comes from Motor Current D-Q
converter. The Torque Current Regulator is evaluated at the inner current loop update rate.
This regulator is the innermost (i.e., fastest) control loop in the NXG Control operating at the
sampling rate of the system (typically 3 to 6 KHz).
6.2.9

Magnetizing Current Regulator

The Magnetizing Current Regulator generates the D-axis motor voltage reference. The
Magnetizing Motor Current Reference (Ids_ref) is generated from the output of the Flux
Regulator. The Magnetizing Producing Current Feedback (Ids) comes from Motor Current D-
Q converter. The Torque Current Regulator is evaluated at the inner current loop update
rate. This regulator is the innermost (i.e., fastest) control loop in the NXG Control operating
at the sampling rate of the system (typically 3 to 6 KHz).
6.2.10

Flux Regulator

The Flux Regulator generates the magnetizing motor current reference. The Flux Reference
(λds_ref) is generated from the control's flux ramp. The Flux Feedback (λds) comes from
Motor Voltage D-Q converter. The Flux Regulator is evaluated at 1/5
loop update rate.
6.2.11

Phase Lock Loop

The Phase Lock Loop module generates the Flux Angle (θ) and Stator Frequency (ω
Flux Q-axis term is generated by the motor voltage D-Q transformation (λ
Lock Loop module is evaluated at 1/5
Product User Manual
Operating Instructions, Version AE 12/2009, A5E01454341C
of the inner current loop update rate.
th
Application and Operation
6.2 The Control Modes
of the inner current
th
). The
out
). The Phase
qs
115