CHASSIS
Make sure that the slot (A) in the bracket
l
complete caliper assembly fits over the
stopper (B) on the swing arm assembly.
(Fig. 6.96)
Note:
While reassembling the disc plate apply
specified thread lock to the disc plate
mounting bolts.
After remounting the wheel assembly rear,
readjust the chain slackness (refer chapter
"Periodic maintenance" page no. 2-32).
TUBELESS TYRE
PUNCTURE REPAIR
Tubeless tyre provides the benefit of easy
repairing the punctured tyre without removing the
wheel assembly. Hence repairing can be
performed in vehicle stand still condition and
repairing procedure is as follows:
Keep the bike firmly on center stand.
l
Identify the punctured location and make a
l
visible mark. (Fig. 6.97A)
Pull out nail or puncture causing object from
l
the tyre using a combination plier. (Fig. 6.97B)
Combination plier
Insert the reaming tool exactly into the
l
punctured point and carefully ream the
punctured hole. (Fig. 6.98)
TVS APACHE RTR 200
B
A
Fig. 6.96
Fig. 6.97A
Fig. 6.97B
Fig. 6.98
SERVICE MANUAL
6-33