Tyre Rotation Direction; Tyre Puncture - TVS Apache RTR 160 BS-VI Owner's Manual

Tyre rotation direction

While reassembling the tyre, after removing from
wheel rim, ensure that the arrow mark (A) provided
on the tyre, faces the direction of wheel rotation.

Tyre puncture

TVS Apache RTR 160 is fitted with a tubeless tyre
on both front and rear wheel. lncase of any puncture
/ tyre damage it is advised to visit nearest tyre
manufacturer Dealer or the tyre repair shops who
know the repairing methods of tubeless tyre. It is not
necessary to remove the tyre from wheel rim always
to attend the puncture. Even though, if there is a
need of tyre removal, it is strongly recommended to
use a tyre removal / fitment machine.
If at all, tyre levers need to be used, the levers should
be free from sharp edges and care should be taken
not to damage the rim and tyre.
Use of a tyre other than the standard may cause
instability and improper function of ABS.
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damage to the toner ring.
Damaged toner ring affects the ABS function.
58
Side walls of the tubeless tyres which are in contact with
the wheel rim are only seals the air inside the wheel
assembly. Hence, care should be taken not to damage
the side walls of the tyres during removal / reassembly.