Reassembly - TVS Apache RTR 200 4V Service Manual

CHASSIS
Tyre front
Using the vehicle with excessively worn tyres
l
will decrease riding stability and consequently
invite a dangerous situation due to loss of
control. It is highly recommended to replace
the tyre with a new one when the groove
depth of tyre from tread surface reaches the
following specifications:
Tyre depth gauge / Vernier caliper
Service limit
Note:
Tyre depth can also be checked by tyre
wear indicator (TWI). (Fig. 6.10)
Tyre inflation pressure
Inflation pressure affects the tyre life to a
l
greater extent. So it is necessary to maintain
proper inflation pressure. (Fig. 6.11)
Tyre pressure gauge
Pressure:
Single and dual
Note:
Tyre pressure should be checked when the
tyre is cold.
Tubeless tyre
Refer page no 6-34 for puncture
l
procedure and replacement of valve tubeless
tyre.

REASSEMBLY

Reassemble the wheel assembly front in the
l
reverse order of disassembly and removal.
Before assembling front wheel assembly,
lubricate the axle front and bearings.
(Fig. 6.9)
1.5 mm
1.75 kg/cm² (25 PSI)
repairing
TVS APACHE RTR 200
Fig. 6.9
Fig. 6.10
Fig. 6.11
SERVICE MANUAL
6-3