User Experience With Macos - Crestron AM-200 Deployment Manual

On AirMedia 2.0 Presentation Gateways, other senders can connect and begin
presenting. A maximum of 32 Windows or Android senders can connect simultaneously,
although only the last device to connect will be able to present. Previously connected
senders that may be presenting are stopped. Other senders can restart a presentation
by pressing the Start button in the application.
For details on using the application, refer to the AirMedia device's product manual or
supplemental guide.
Launch with Automatic Connection
For custom deployments, the application can also be launched and connected with a
device automatically using the following command in a Windows command prompt:
start present:<IP_ADDRESS>?code=<CODE>
where <IP_ADDRESS> is the IPv4 address of the AirMedia device and <CODE> is the
login code for the AirMedia device.

User Experience with macOS

The basic macOS user experience is similar to that of Windows, but has some important
differences as discussed below.
AirMedia Guest Application
The macOS guest application is a small file that is downloaded from the AirMedia device,
and runs with standard user permissions. The user needs to open the .zip package and
then run the guest application within the package. The IP address of the AirMedia device
is encoded in the filename of the application so the application can connect with the
AirMedia device upon startup. The user can save the .zip package locally, which enables
direct connection to the device the next time the user accesses the application and
AirMedia device.
NOTE: The guest application for macOS can also be downloaded from
present.crestron.com
The guest application can be distributed with the connection parameters embedded in
the file name so the user only has to enter the login code (if required).
The supported formats are:
<any_text>_.<ip_address>.dmg
<any_text>_<ip_address>.dmg
The underscore and dot must precede the IP address, for example:
executive_conference_room_.10.1.1.13.dmg.
To download the guest application from the AirMedia device, complete the steps below:
1. Open a web browser and enter the AirMedia device's IP address or hostname into
the browser.
Deployment Guide – DOC. 7693K
and distributed to websites or other media for users to download.
AirMedia Presentation Gateway • 29