Crestron AM-200 Deployment Manual page 17

For the ports used by AirMedia 2.0 Presentation Gateways such as the AM-200,
AM-300, DMPS3, CCS-UC-1, or for AM-101 devices using full-screen mirroring on mobile
devices and macOS, refer to the table below.
Port Map 2: Ports Used by AirMedia 2.0 Presentation Gateways (AM-200, AM-300, DMPS3,
CCS-UC-1) and AM-101 for macOS, iOS and Android full-screen mirroring
PORT TYPE DIRECTION
4100 - UDP Both
4101
5353 UDP Both
6000- TCP, Both
7000 UDP
7011 UDP Both
7200 TCP Both
- 7201
47010 TCP Both
For the ports used by the AM-100 and AM-101, refer to the table below.
Port Map 3: Ports Used by the AirMedia Presentation Gateway (AM-100 and AM-101)
PORT TYPE DIRECTION
21 TCP Both
80 TCP Both
137 TCP Both
138 UDP Both
41794 TCP Both
42891 TCP Both
42892
Deployment Guide – DOC. 7693K
FUNCTION OPEN
Control Required
Channel
Discovery Optional
Audio, Video Required
Control Required
Channel
Control Required
Channel
Audio, Video Required
FUNCTION OPEN
Update Utility Optional
Web Services Required
NetBIOS Optional
Discovery
NetBIOS Optional
Discovery
Control System Required
Update Utility Required
NOTES
This pot carries control channel information.
If this port is blocked, AirMedia will not
function.
This port is for AirMedia Presentation
Gateway discovery. If this port is blocked,
automatic network discovery will not
function correctly.
These ports carry audio and video streams. If
these ports are blocked, AirMedia will not
function.
This port carries control channel information.
If this port is blocked, AirMedia will not
function.
This port carries control channel information.
If this port is blocked, AirMedia will not
function.
This port carries audio and video. If this port
is blocked, AirMedia will not function.
NOTES
This port is used only to transfer the
firmware to the device with the batch
update application. This port is not used
when updating with the web interface.
This port is used to access the AirMedia
device configuration website.
This port allows the device to be resolved
without a DNS server present. This port is
enabled if the hostname is fewer than 15
characters.
This port allows the device to be resolved
without a DNS server present. This port is
enabled if the hostname is fewer than 15
characters.
This port is used to control Crestron
Connected devices.
These ports are used to control firmware
updates and are used only with the batch
update application. These ports are not used
when updating the device with the web
interface.
AirMedia Presentation Gateway • 13