Crestron AM-200 Deployment Manual page 16

The AirMedia application requires firewall rules to allow it to communicate with AM-100
and AM-101 devices. Crestron requires creating a rule for the application that allows all
traffic to pass to the device. If the rule is not created, the operating system prompts the
user with the option to add a rule. This may require administrator privileges.
For the set of ports that allow the client to communicate with the device, refer to the
table below.
Port Map 1: Ports Used by the AirMedia Guest and Deployable Applications
PORT TYPE DIRECTION
80 TCP Both
389 TCP Both
443
445
515 TCP Both
1041 TCP Outbound
1047 UDP Inbound
1048
1049
1688 TCP Both
3268 TCP Both
7000 TCP Both
7100 TCP Both
7200 - TCP Both
7201
8080 TCP Both
19996 TCP Both
31865 TCP Both
47000 TCP Both
12 • AirMedia Presentation Gateway
FUNCTION OPEN
Projector Optional
Control
Control Required
Channel
Video Required
Control Required
Channel
Discovery Optional
Audio Recommended
Control Required
Channel
Control Required
Channel
Control Required
Channel
Control Required
Channel
Video Required
Future Optional
Discovery Optional
Control Required
Channel
NOTES
This port is used to turn on a Crestron
Connected projector. If this port is blocked,
the device functions normally, but the
automatic projector power on feature does
not work.
For best performance, Crestron recommends
that ports 389, 443, and 445 be open. At a
minimum, one port needs to be open for the
device to function properly. If only one port is
open and that port is used by another
application, AirMedia will not function
properly.
This port is for the video data channel.
If this port is not open, AirMedia does not
function properly.
These ports are used for device discovery. If
the port is closed, AirMedia may not be able
to find devices automatically.
This port is for the audio data channel.
This port is used as part of the screen
sharing process.
This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.
This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.
This port carries control channel information.
If this port is blocked, AirMedia will not
function.
This port is for the video data channel. If the
port is not open, AirMedia does not function
properly.
This port is reserved for future use.
This port is used for device discovery. If this
port is closed, AirMedia may not be able to
find devices automatically.
This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.
Deployment Guide – DOC. 7693K