Related Manuals for Crestron DMPS3-4K-200-C
Summary of Contents for Crestron DMPS3-4K-200-C
- Page 1 DMPS3-4K-200-C/DMPS3-4K-300-C Series 3-Series 4K DigitalMedia™ ® Presentation Systems Supplemental Guide Crestron Electronics, Inc.
- Page 2 HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
-
Page 3: Table Of Contents
Messages ....................... 9 Time/Date ......................10 Front Panel......................11 Using the Routing Push Buttons DMPS3-4K-200-C Routing Push Buttons..............12 DMPS3-4K-250-C Routing Push Buttons..............13 DMPS3-4K-300-C Routing Push Buttons..............13 DMPS3-4K-350-C Routing Push Buttons..............14 Routing an Input to Outputs ..................14 Viewing Routing Status .................... -
Page 5: Introduction
The DMPS3-4K-200-C/DMPS3-4K-300-C ® Series consists of the following models: • DMPS3-4K-200-C: Provides matrix signal routing for up to seven video sources and two displays. Video inputs consist of six HDMI inputs and one DM 8G+ input. ®... -
Page 6: Using The Front Panel Lcd
This guide provides information about using the LCD and the routing push buttons on the front panel of the DMPS3-4K-200-C/DMPS3-4K-300-C Series. For installation information, refer to the DMPS3-4K-200-C/DMPS3-4K-300-C DO Guide (Doc.7791) or to the DMPS3-4K-250-C/DMPS3-4K-350-C DO Guide (Doc. 8215). For information about the built-in AirMedia receiver of the DMPS3-4K-250-C and DMPS3-4K-350-C, refer to the AirMedia Presentation Gateway Deployment Guide (Doc. -
Page 7: Accessing And Navigating The Setup Menu
To go back to the previous level in a menu, press the MENU button. • To select an item in a series of items displayed horizontally on the LCD, press the soft button under the desired item. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 3 Supplemental Guide – DOC. 7849B... -
Page 8: Configuring Network Settings
VOLUME control or the ▲ and ▼ until the desired buttons setting appears in the octet. 3. Press ENTER to apply the IP address. 4 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems Supplemental Guide – DOC. 7849B... -
Page 9: Subnet Mask
2. Do either of the following: • To enable DHCP, select On (default setting). • To disable DHCP, select Off. 3. Press ENTER to apply the setting. An asterisk precedes the selected setting. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 5 Supplemental Guide – DOC. 7849B... -
Page 10: Hostname
LCD. Domain Name CRESTRON.CRESTRON.C 2. Press ENTER to change the domain name. A screen appears allowing the domain name to be changed. CRESTRON.CRESTRON.C < > 6 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems Supplemental Guide – DOC. 7849B... -
Page 11: Mac Address
ID to be changed. Set System ID ▲ 3. Using the button, select a unique system ID number. 4. Press ENTER to apply the system ID number. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 7 Supplemental Guide – DOC. 7849B... -
Page 12: Configuring Control Settings
▲ button as appropriate. To move the cursor to the left (if necessary), press the ▼ button. 3. Press ENTER to apply the password. 8 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems Supplemental Guide – DOC. 7849B... -
Page 13: Info
To go to the beginning of the system log, press the soft button under Top (not shown in the screen above). • To erase all messages in the log, press the soft button under Clear. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 9 Supplemental Guide – DOC. 7849B... -
Page 14: Time/Date
To set either AM or PM, press the soft button under AM/PM. Brackets enclose AM or PM. Use the ▲ ▼ button to select AM or PM. Press ENTER to apply the settings. 10 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems Supplemental Guide – DOC. 7849B... -
Page 15: Front Panel
To enable the front panel controls, select On (default setting). • To disable the front panel controls, select Off. 3. Press ENTER to apply the setting. An asterisk precedes the selected setting. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 11 Supplemental Guide – DOC. 7849B... -
Page 16: Using The Routing Push Buttons
Information about viewing routing status is also provided. DMPS3-4K-200-C Routing Push Buttons The DMPS3-4K-200-C provides a ROUTE push button, a VIEW push button, seven INPUT push buttons, five OUTPUT push buttons, and corresponding LEDs as shown in the illustration below. -
Page 17: Dmps3-4K-250-C Routing Push Buttons
DMPS3-4K-300-C Routing Push Buttons and LEDs The INPUT push buttons consist of the following: • Six HDMI push buttons numbered 1–6 • Two DM push buttons numbered 7 and 8 DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 13 Supplemental Guide – DOC. 7849B... -
Page 18: Dmps3-4K-350-C Routing Push Buttons
4. Press ENTER to apply the route. The ROUTE and INPUT LEDs remain solid red, and the OUTPUT LEDs of the selected outputs light solid red. 14 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems Supplemental Guide – DOC. 7849B... -
Page 19: Viewing Routing Status
2. Press the desired OUTPUT button. The LCD displays the number of the selected output and the number of the input that is being routed to the selected output. DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 15 Supplemental Guide – DOC. 7849B... - Page 20 Crestron Electronics, Inc. Supplemental Guide – DOC. 7849B 15 Volvo Drive, Rockleigh, NJ 07647 (2047259) Tel: 888.CRESTRON 12.17 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.