Crestron 4K DigitalMedia DMPS3-4K-350-C-AIRMEDIA Do Manual

DO GUIDE
DMPS3-4K-250-C/DMPS3-4K-350-C Series
3-Series 4K DigitalMedia™ Presentations Systems
®
DO Install the Device
The Crestron DMPS3-4K-250-C, DMPS3-4K-350-C, DMPS3-4K-250-C-AIRMEDIA, and DMPS3-4K-350-C-AIRMEDIA can be mounted into a rack or placed
®
onto a flat surface.
Mount into a Rack
The DMPS3 devices each occupy 3U of rack space. Using a #1 or #2
Phillips screwdriver, attach the two included rack ears to the device.
Then, mount the device into the rack using four mounting screws
(not included).
Place onto a Flat Surface
When placing the device onto a flat surface or stacking it with other
equipment, attach the included feet near the corners on the underside
of the device.
DO Connect the Device
Connect the device as required for the application.
DMPS3-4K-250-C/DMPS3-4K-250-C-AIRMEDIA Rear Panel Connections
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
IR - SERIAL OUT 1-4: IR IN: RELAY 1-4:
To IRP2 IR emitter probe From
To
or one-way serial CNXRMIRD
controllable COM A and COM B:
controlled devices IR receiver devices To RS-232 devices
L R L R
L R L R L R
AUD IN 1-5: HDMI INPUTS 1-6: MC/LN 1-6:
From balanced/ From HDMI ® From balanced
unbalanced stereo audio/video sources microphone/
line-level analog line-level
audio sources audio sources
Rack Ear Attachment
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
stereo speakers or SERVICE:
70-volt/100-volt For factory
mono speakers use only
Ground
PoDM+
INPUT PWR: 100-240V~6.0A
NET: From Crestron 50/60 Hz:
To Cresnet From ac
® PoDM+ power
devices supply power outlet
1
L R L R L R
DM INPUT: DM OUTPUT: CONTENT CONTROL LAN:
HDMI
From DM 8G+ ® OUTPUT: To DM 8G+ LAN: SUBNET: 10BASE-T/
output of DM ® To HDMI input of DM 10BASE-T/ To Crestron 100BASE-TX/
transmitter or receiver or 100BASE-TX local 1000BASE-T
display
other DM other DM Ethernet to network Ethernet to
device or from device or to LAN for device 1 LAN
HDBaseT device HDBaseT AirMedia or
® 1
device 1 H.264 content
input (optional) 2
PROG OUT:
Audio output to
ampli er or
ampli ed speakers
DO Check the Box
QUANTITY ITEM
2 Bracket, Rack Ear, 3U
1 Cable, USB 2.0, A - B, 6' (1.83 m)
3 Connector, 2-Pin
1 Connector, 3-Pin
4 Connector, 4-Pin
15 Connector, 5-Pin
2 Connector, 8-Pin
4 Foot, 0.5" x 0.5" x 0.23", Rubber
1 Power Cord, 6' 7" (2 m)
6 Screw, 6-32 x 5/16", Undercut Head, Phillips
DMPS3-4K-350-C/DMPS3-4K-350-C-AIRMEDIA Rear Panel Connections
From sense output of
digital output devices
(24 volts maximum)
IR - SERIAL OUT 1-4: IR IN:
To IRP2 IR emitter probe From
or one-way serial
CNXRMIRD
controlled devices IR receiver
L R L R
L R L R L
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DO Determine the Address of the Device
The device can be addressed using the hostname. The default hostname is DMPS3-xxxxxxxx, where xxxxxxxx consists of the last eight characters (excluding
punctuation) of the MAC address. For example, if the MAC address is 00:10:7F:08:09:AA:05, the default hostname is DMPS3-0809AA05. The MAC address is
labeled on the shipping box and rear panel of the device.
Alternatively, the device can be addressed using the IP address. By default, DHCP is enabled. To set a static IP address, use any of the following:
• Crestron Toolbox™ software on a PC that connects to the device via the Ethernet network
NOTE: The Device Discovery Tool can be used to find the current IP address.
• A USB connection to the COMPUTER port on the front panel of the device
AUX OUT 1-2:
To video
• The front panel LCD display menu
teleconferencing
or codec input
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
INPUT 1-4:
stereo speakers or
70-volt/100-volt
mono speakers
RELAY 1-4:
To NET:
controllable COM A and COM B: To Cresnet
devices To RS-232 devices devices
R
HDMI INPUTS 1-6: MC/LN 1-6: DM INPUTS: HDMI DM OUTPUTS:
From HDMI From balanced From DM 8G+ OUTPUTS: To DM 8G+
audio/video sources microphone/ output of DM input of DM
To HDMI
line level transmitter or displays receiver or
audio sources other DM other DM
device or from device or to
HDBaseT device 1 HDBaseT
device
PART NUMBER
2033588
2014966
2012361
2003575
2003576
2003577
2003580
2002389
2001134
2007223
SERVICE:
For factory
use only
Ground
PoDM+
INPUT PWR: 100-240V~6.0A
From Crestron 50/60 Hz:
PoDM+ power From ac
supply 1 power outlet
L R L R L R
CONTENT CONTROL LAN:
LAN: SUBNET: 10BASE-T/
10BASE-T/ To Crestron 100BASE-TX/
100BASE-TX local 1000BASE-T
Ethernet to network Ethernet to
LAN for device LAN
1
AirMedia or
AUX OUT 1-2:
1 H.264 content
To video
input (optional)
2
teleconferencing
or codec input
PROG OUT:
Audio output to
ampli er or
ampli ed speakers