Crestron AM-200 Deployment Manual page 31

AirMedia Download Screen for AM-100 and AM-101
3. Run the application.
NOTE:
PC, a list of AirMedia devices is displayed if the Autodiscovery feature is enabled
in the application's settings (otherwise, click the refresh icon to detect devices).
Select the device to connect to, and then click CONNECT.
4. If prompted, enter the login code shown on the connected display. If a Crestron
Connected® display is connected and configured for operation, the display turns
on automatically during this process.
The presentation session begins immediately following the entry of the code or, if no
code is required, upon entry of the IP address or host name.
On AirMedia 2.0 Presentation Gateways, other senders can connect and begin
presenting. A maximum of 32 Windows or Android senders can connect simultaneously,
although only the last device to connect will be able to present. Previously connected
senders that may be presenting are stopped. Other senders can restart a presentation
by pressing the Start button in the application.
For details on using the application, refer to the AirMedia device's product manual or
supplemental guide.
AirMedia Deployable (Installed) Application
The deployable application shows the user a list of devices on the Connect dialog box.
The user can select a device for connection or search for a device within a longer list of
devices.
Deployment Guide – DOC. 7693K
If the downloaded application was previously closed and restarted on the
AirMedia Presentation Gateway • 27