Appendix B-4: Setting Tab - HighPoint RocketRAID 4520 User Manual

If device is currently beeping, clicking Beeper Mute will mute the sound immediately.
Note: This button does not permanently mute the alarm. To permanently mute the
alarm go to Setting>Enable audible alarm>Disabled.

Appendix B-4: Setting Tab

System Settings
Enable auto rebuild (default: Enabled)
When a physical drive fails, the controller will take the drive offline. Once you re-
insert or replace the disk, the controller will not automatically rebuild the array
unless this option is enabled.
Enable continue rebuilding on error (default: Enabled)
When enabled, the rebuilding process will ignore bad disk sectors and continue
rebuilding until completion. When rebuild is finished, the data may be accessible but
data inconsistency due to ignored bad sectors may cause problems in the future. If
this option is enabled, HighPoint recommends user to check the event log for bad
sectors.
76