Step 4C: Create Raid Arrays Using Cli (Windows / Linux / Freebsd) - HighPoint RocketRAID 4520 User Manual

Step 4C: Create RAID Arrays using CLI (Windows / Linux / FreeBSD)

Start your operating systems console such as command prompt (Windows). On the
command line, type hptraidconf to start HighPoint CLI. Enter your login credentials
when prompted (default username: RAID / password: hpt).
In order to see the devices connected to the controller, type query devices.
The device ID gives the position of each drive and is needed to select which drive will
be included in the array.
29