J6
A1, A2
(RR4520)
F1, F2
(RR4520)
What's in the Box
Make sure the following items are included in your purchase:
RR4522 Host Bus Adapter (S/N sticker located on RocketRAID card)
Driver CD
Low profile bracket
Quick Installation Guide
Note: Cables and Battery Backup Unit (BBU) are sold separately.
Getting Started
Thank you for purchasing HighPoint Technologies RocketRAID 4522. You are only a
few steps away from utilizing RAID storage using the industry's most affordable
hardware RAID solution.
To start using your RocketRAID 4522 take the following steps:
1. Setting up the Hardware (pg. 7)
2. Install/Update drivers (pg. 9)
3. Install HighPoint RAID Management (WebGUI) (pg. 15)
4. Create RAID Arrays (pg. 20)
5. Initialize and format RAID Volumes (pg. 30)
Step 1: Setting Up the Hardware
Ensure all items listed under Kit Contents are included in your package. For any
discrepancy contact your reseller or submit a support ticket online at
tech.com/websupport.
Battery Backup Unit (BBU) Connector
Active LED pin
Fail LED pin
PIN 1 SCL
PIN 2 GND
PIN 3 SDA
www.highpoint-
7