Webguiremote Login - HighPoint RocketRAID 4520 User Manual

Example event log email message.
WebGUI Remote Login
A user connected to a local network can remotely access the WebGUI using the IP
address of the host device.
To obtain your IP address
For Windows Users:
1. Open a command prompt window on the host computer.
2. Type ipconfig.
3. Look for the section that contains your network adapter information.
4. Note the IP address.
Example: The IPv4 address is under Ethernet adapter Ethernet 4 and is 192.168.1.143
Note: Make sure Restrict to localhost access is disabled in WebGUI Setting (Refer to
setting)
38