Table 7-2 Procedure For Identifying The Software Version - Honeywell UDC3300 Product Manual

7.2 Troubleshooting Aids,
Controller failure
symptoms
Check Installation
Determining the
software version
72
Other failures may occur that deal with the Power, Latching Output Relay,
or Non-Latching Alarm Relays. Refer to the controller failure symptom in
Table 7-7 to determine what is wrong and the troubleshooting procedures
to use to correct the problem.
If a set of symptoms still persists, refer to Section 2 — Installation and
ensure proper installation and proper use of the controller in the system.
Table 7-2 lists the procedure for identifying the software version number.
Table 7-2 Procedure for Identifying the Software Version
Step Operation
1
Select
STATUS
Set Up Group
2
Read the
software version
UDC3300 Limit Controller Product Manual
Continued
Press
Until you see:
SET UP
Upper Display
READ
Lower Display
STATUS
Until you see:
FUNCTION
Upper Display
Lower Display
VERSION
Please give this number to the Customer
Support person. It will indicate which version
of UDC3300 you have and help them
determine a solution to your problem.
Action
Software
version
Number
1/01