Viewing Registered Points - Casio 3452 Operation Manual

2.
Rotate the rotary switch to select whether
or not you want to assign an icon to the
point you recorded.
[YES]: Assigns an icon.
[NO]: Cancels icon registration.
3.
Press the rotary switch.
If you select [NO] (no icon assigned)
●
above, this completes the recording
procedure and returns to the navigation
screen.
4.
Rotate the rotary switch to move the
pointer to the icon you want.
To cancel icon assignment, perform the
●
steps below.
A Press (C).
B Rotate the rotary switch to select
whether or not you want to save the
current settings.
[YES]: Registers the currently selected
icon.
[NO]: Cancels icon registration.
C Press the rotary switch.
5.
Press the rotary switch to exit the setting
screen.
This assigns the icon you selected to the
point you recorded.
Note
In place of step 1 of the above
●
procedure, you could perform the
steps below to register your current
location.
A While a navigation operation is in
progress, press (C).
B Rotate the rotary switch to move the
pointer to [POINT MEMORY].
C Press the rotary switch.
Operation Guide 3452

Viewing Registered Points

You can use the procedure below to display
details about registered points. You can also
change icons assigned to points and delete
points as required.
1.
Press the rotary switch.
This displays the GPS Navigation Mode
setting screen.
2.
Rotate the rotary switch to move the
pointer to [RECALL].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to [POINT].
5.
Press the rotary switch.
This displays a menu of dates and times
that points were registered.
6.
Rotate the rotary switch to move the
pointer to the date and time of the point
you want to check.
7.
Press the rotary switch.
This displays details about the selected
point.
Due to legal restrictions in certain
●
countries and areas, the watch may not
display latitude and longitude
information.
Using GPS Outside Your Country
l
To change the icon assigned to a
●
registered point
1.
While point details are displayed, press
the rotary switch.
2.
Rotate the rotary switch to move the
pointer to the icon you want.
3.
Press the rotary switch.
Rotary Switch
This changes to the icon you selected.
4.
Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
To protect a registered point
●
A protected point cannot be deleted.
While the menu of locations is displayed
1.
Rotate the rotary switch to move the
Rotary Switch
pointer to the date and time of the point
you want to protect.
2.
Press (D).
This protects the selected point.
A protected point is indicated by
Press (D) again to unprotect.
●
3.
Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
Rotary Switch
Rotary Switch
.
15