2.
X Press (D).
3.
X Rotate the rotary switch to move the
pointer to [PHONE FINDER].
4.
X Press the rotary switch.
This will establish a connection between
the watch and phone, and sound the
phone's ringtone.
It will take a few seconds before the
●
phone tone sounds.
5.
X Press any button besides (B) to stop the
tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Unpairing
1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
Disconnected
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
After Purchasing Another Phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l
Operation Guide 3452
Adjusting the Time
Setting
Your watch can receive GPS signals and
connect with a phone to obtain information
that it uses to adjust its date and time setting.
Getting ready
Enter the Timekeeping Mode.
Navigating Between Modes
l
Important!
Put the watch into the Airplane Mode
●
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
Using the Watch in a Medical
l
Facility or Aircraft
GPS Time Adjustment
Overview
The watch's time and day settings can be
configured in accordance with your current
time zone by receiving a GPS signal.
GPS signal location information: Used to
●
update time zone, time, and day settings.
GPS signal time information: Used to
●
update time and day settings.
Important!
Before trying to receive GPS signal
●
time information, first use GPS to
acquire location information and
configure the time zone setting.
The watch will normally not perform
●
auto GPS signal receive while it is
paired with a phone. However, auto
GPS signal receive will be performed if
there is no connection between the
watch and phone for more than one
day.
Appropriate Signal Reception
Location
GPS signal reception is possible outdoors
where the sky is visible and not blocked by
buildings, trees, or other objects.
Rotary Switch
Note
In areas where reception is poor, keep
●
the watch LCD pointed upwards and
do not move the watch.
When the watch is set up for auto
●
receive, take care to avoid covering its
LCD with the sleeve of your clothing.
GPS signal reception is not possible in
●
the areas described below.
Where the sky is not visible
ー
Indoors (Reception may be possible
ー
near a window.)
Near wireless communication
ー
equipment or other devices that
generate magnetism.
You may experience GPS signal
●
reception problems in the areas
described below.
Where the view of the sky above is
ー
narrow
Near trees or buildings
ー
Near a train station, airport, or other
ー
congested areas
9