Operation Guide 3459 Before Getting Navigating Between Modes Solar Charging Started... Press (C) to cycle between modes. This watch runs on power supplied from a rechargeable (secondary) battery that is In any mode, hold down (C) for about one This section provides an overview of your ●...
Page 3
Operation Guide 3459 Low Battery Charging Time Guidelines Power Saving Function ● ● ● A low battery will cause [LOW] to flash and will The table below shows guidelines for Leaving the watch in a dark location for about disable the functions below.
To connect the watch with a phone, first install If there is a World Time City specified ● the CASIO “G-SHOCK Connected” app on the Your watch can receive time signals and with G-SHOCK Connected, its time phone and then use Bluetooth to pair the will also be adjusted automatically.
Operation Guide 3459 Appropriate Signal Reception Time Signal Reception Ranges Time Adjustment Using a Location Time Signal Time calibration signal reception is supported in the areas shown below. A time calibration signal can be received while the watch is near a window.
Operation Guide 3459 Auto Time Signal Receive Using the Watch in a Medical Receive Level Indicator An automatic time calibration signal receive Facility or Aircraft operation is performed and the time and day While a receive operation is in progress, its...
Operation Guide 3459 Disconnecting from a Phone If you purchase another phone Connection Pressing any button will terminate a Bluetooth You need to perform the pairing operation Connecting with a Phone connection and return to the Timekeeping whenever you want to establish a Bluetooth Mode.
Operation Guide 3459 Creating a User City Configuring Reminder Configuring World Time ● Settings Settings In addition to the approximately 300 cities available with G-SHOCK Connected, you can specify a location on an on-screen map and After you use G-SHOCK Connected to create Specifying a World Time City with G-SHOCK create a user city.
Operation Guide 3459 Configuring the Summer Time Setting Swapping Your World Time and Home ● ● X If the watch is in any mode besides the Time Y Tap the “G-SHOCK Connected” icon. Timekeeping Mode, hold down (C) for Y Tap the “G-SHOCK Connected” icon.
Operation Guide 3459 Reminders World Time Changing the Home City Summer Time Setting If you use G-SHOCK Connected to record an World Time lets you look up the current time appointment, anniversary, or some other in any one of 39 cities around the globe, and Y Tap the “G-SHOCK Connected”...
Operation Guide 3459 World Time City Setting Configuring Alarm Settings Note You can specify up to five cities as your World Use (D) to display the alarm screen (alarm While [UTC] is selected as the city, ● Time favorites. If you are in an area that...
Operation Guide 3459 Stopwatch Enabling/Disabling an Alarm Measuring a Split Time or the Hourly Time Signal The stopwatch can measure elapsed time up to 23 hours, 59 minutes, 59 seconds (24 Use (D) to display the item whose on/off hours).
Operation Guide 3459 Timer Timing the First and Second Using the Timer Place Finishers The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. The beeper is muted in the cases described ●...
Operation Guide 3459 Switching between 12-hour Hold down (A) for about two seconds until and 24-hour Timekeeping [HT] flashes. Home City You can specify either 12-hour format or 24- Home City hour format for the time display. Summer time Hold down (A) for about two seconds until [HT] flashes.
Operation Guide 3459 Changing the Date Display Specifying the Day of the Auto Light Format Week Language If Auto Light is enabled, display illumination will turn on automatically whenever the watch You can select either month/day or day/month You can select any one of six languages for is positioned at an angle of 40 degrees or more as the date display format.
Operation Guide 3459 Other Settings Configuring the Auto Light Configuring Power Saving Setting Function Settings Getting Ready Enter the Timekeeping Mode. Enter the Timekeeping Mode. Hold down (A) for about two seconds until Navigating Between Modes Navigating Between Modes [HT] flashes.
Operation Guide 3459 Other Information In the aircraft, before arriving at your ● Press (C) twice. destination This causes the seconds to flash. This section provides non-operational Swap the origin time zone time with the information you also need to know. Refer to destination time zone time.
Start For information about phones that can Time zones may change and UTC ● 02:00, last 01:00, last connect with the watch, visit the CASIO differentials may become different from London Sunday in Sunday in March website. those shown in the table above. If this...
● Time setting adjusted automatically at under applicable radio laws may be a Watch preset time. criminal offense. For details, visit the CASIO The watch is emitting radio waves whenever One-touch Time Correction Website. e is flashing or displayed. Manual connection and time adjustment http://world.casio.com/ce/BLE/...
For information about supported phone battery power is low. Keep the watch models, visit the CASIO Website. Minimize movement of the watch and do exposed to light until it recharges not perform any watch operation while a http://world.casio.com/os_mobile/wat/...
Page 21
Operation Guide 3459 I can’t reconnect the watch Auto Time Adjustment by I can’t connect after turning off the and phone. Bluetooth Connection (Time phone. Adjustment) Turn on the phone and tap the “G-SHOCK The watch will not re-connect with the Connected”...
Page 22
Operation Guide 3459 The watch does not connect with a phone and adjust its time when I press (D). The watch will not adjust its time if you press (D) while a timer countdown operation is in progress. Stop the timer countdown operation and then press (D) again.