Casio 3452 Operation Manual page 39

I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is G-SHOCK Connected running?
The watch cannot re-connect with the
phone unless G-SHOCK Connected is
running on the phone. On the phone's
Home Screen, tap the G-SHOCK
Connected icon. Then on the watch, hold
down (C) for about 2.5 seconds to enter
the Communication Mode.
Mode Overview
l
Have you tried turning your phone off and
then back on again?
On the phone, turn power off and then
back on, and then tap the G-SHOCK
Connected icon. Next, on the watch, hold
down (C) for about 2.5 seconds to enter
the Communication Mode.
Mode Overview
l
Q2
I can't connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone is in the Airplane Mode. On
the phone, exit the Airplane Mode, and then
go to the Home Screen and tap the "G-
SHOCK Connected" icon. Next, on the watch,
hold down (C) for about 2.5 seconds to enter
the Communication Mode.
Mode Overview
l
Operation Guide 3452
Q3
I can't connect while the watch is in
the Airplane Mode.
On the watch, exit the Airplane Mode. Next,
on the watch, hold down (C) for about 2.5
seconds to enter the Communication Mode.
Mode Overview
l
Q4
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
On the phone, disable and then re-enable
Bluetooth, and then go to the Home Screen
and tap the "G-SHOCK Connected" icon.
Next, on the watch, hold down (C) for about
2.5 seconds to enter the Communication
Mode.
Mode Overview
l
Q5
I can't connect after turning off the
phone.
On the phone, turn on power and then tap the
G-SHOCK Connected icon. Next, on the
watch, hold down (C) for about 2.5 seconds to
enter the Communication Mode.
Mode Overview
l
Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
On the phone, turn power off and then
back on, and then tap the G-SHOCK
Connected icon. Next, on the watch, hold
down (C) for about 2.5 seconds to enter
the Communication Mode.
Mode Overview
l
Has the watch been re-paired with the
phone?
After unpairing the watch and phone, re-
pair them again.
Unpairing
l
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
A Hold down (C) for about one second to
enter the Timekeeping Mode.
B Press (A) to display the setting screen.
C Rotate the rotary switch to move the
pointer to [UNPAIRING].
D Press the rotary switch.
E Rotate the rotary switch to move the
pointer to [YES].
F Press the rotary switch to delete pairing
information.
G Press (C) to exit the setting screen.
39