Casio 3423 Operation Manual

WORLDWIDE
MA1411-EC © 2014 CASIO COMPUTER CO., LTD.
Main Menu
Manuals
Basic Operations
STB-1000
Operations common to each
mode are shown below. Check
content when using the watch.
Main Menu
Mode Switching
Mode Switching
Tap Operations
This watch has eight modes
(functions), including the
Timekeeping Mode that displays
Top of Page
the current time.
(Timekeeping Mode)
Timekeeping Mode
Stopwatch Mode
Recall Mode
World Time Mode
Alarm Mode
Countdown Timer Mode
Setup Mode
Control Mode
Control Mode
Operation Guide 3423
Press B to switch modes. The
flowchart below shows how the
mode switches when you press
B.
* To toggle between the Control
Mode and other modes, hold
down B for approximately three
seconds. Perform this operation
while the Control indicator is on
the display.
a. Control indicator
The Control Mode can be
switched only when connected to
a mobile phone. For details, refer
to the CASIO WATCH+ App
Setup Guide.
Important!
The Control Mode cannot be
switched to while the app
setting is one that does not
use the Control Mode.
Mode Switching
Tap Operations
Main Menu
Tap Operations
When an alarm or timer beep or
vibration alert operation is being
performed, the tap operation can
be used to stop the beep or
vibration.
The tap indicator flashes on the
display while the tap operation is
enabled.
a.Tap indicator
At this time, tapping the center of
the watch's display twice
(double-tapping) stops the beep
or vibration.
Important!
Tapping the display with your
fingernail or some other hard
object can scratch the watch's
display panel. Be sure to tap
with the ball of the finger.
Mode Switching
Tap Operations
Top of Page