Casio 3452 Operation Manual page 38

Signal Reception (GPS)
Q1
The watch cannot perform a GPS
signal receive operation.
Is the watch's battery charged?
GPS signal reception is not possible while
the battery indicator is
Charge the watch.
Charging the Watch
l
Is the watch in the Timekeeping Mode?
GPS signal reception is not possible
unless the watch is in the Timekeeping
Mode. Signal reception is also disabled in
the Airplane Mode. Return to the
Timekeeping Mode.
Navigating Between Modes
l
After checking the above, the watch still
cannot perform a GPS signal receive
operation.
GPS signal reception is not possible
under the conditions described below.
During power saving
●
Timer countdown operation in progress
●
Q2
The watch is not receiving time
information.
The watch will not perform auto GPS signal
receive while there is a connection between it
an a phone. If you want to receive GPS signals
in this case, perform manual receive.
Acquiring GPS Time Information Manually
l
Connecting with a Phone to Adjust the
l
Watch's Time
Q3
A screen showing that a receive
operation is in progress has been on
the display for a long time.
The watch may be receiving leap second
information.
Leap Second Reception
l
Operation Guide 3452
Q4
The GPS signal receive operation
always fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where GPS signal
reception is better.
or lower.
Appropriate Signal Reception Location
l
Is the LCD of the watch pointed straight up
at the sky?
Minimize movement of the watch while the
receive operation is in progress.
When the watch is set up for auto receive,
take care to avoid covering its LCD with
the sleeve of your clothing.
An alarm started sounding while the
receive operation was in progress.
Receive stops if an alarm operation starts
while it is being performed. Disable the
alarm.
To turn an alarm on or off
l
Q5
Signal reception should have been
successful, but the watch's time and/
or day is wrong.
Is your Home City (time zone) setting
correct for your location?
Change your Home City (time zone)
setting so it correctly indicates your
location.
Acquiring GPS Position Information
l
Manually
Setting a Home Time City
l
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
Did you install G-SHOCK Connected on
your phone?
G-SHOCK Connected needs to be
installed on your phone in order to
connect with the watch.
A Install the app on your phone.
l
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings" n "Bluetooth" n On
●
"Settings" n "Privacy" n "Bluetooth
●
Sharing" n "G-SHOCK Connected" n
On
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use G-SHOCK Connected.
For details about setting procedures, see
your phone documentation.
On the Home Screen, tap: "Menu" n
"Settings" n "Bluetooth" n "Menu" n "BT
Smart settings" n "Disable".
38