Checking The Charge Level; Power Saving Function; Pairing The Watch With A Phone - Casio 3452 Operation Manual

Checking the Charge Level

You can determine the watch's current charge
level in any mode.
Charge
Indicator Usable Functions
level
All
High
All functions except those
that use GPS
Timekeeping only
Low
(Button operations
disabled.)
When the battery indicator becomes
●
message [CHARGE] will also appear on the
display.
The display goes blank when the battery
●
goes dead.
Important!
Charge the watch as soon as possible
●
after the battery indicator becomes
or lower. Leaving the watch without
charging for a number of months will
result in over-discharge, and may
make future charging impossible. If
this happens, contact your original
retailer.
Operation Guide 3452

Power Saving Function

Leaving the watch in a dark location in the
Timekeeping Mode for 70 minutes or longer
between the hours of 9 p.m. and 6 a.m. will
cause the watch to enter Level 1 power
saving. If the watch is left in this condition for
six or seven days, the watch will enter Level 2
power saving. The display of the watch goes
blank when the watch is in power saving.
Power Saving Level 1 :
The functions below can be used while the
watch is in Level 1 power saving.
Alarm
●
Timer
●
Phone connection
, the
●
Power Saving Level 2 :
All functions disabled.
Recovering from Power Saving
●
Use one of the operations below to exit power
saving.
Press any button.
●
Move the watch to a bright location.
●
Trigger auto light by angling the watch
●
towards your face.
Note
The watch will not enter power saving
●
in the cases below.
During sensor measurement
ー
operations in each mode, such as
when the barometric pressure
change indicator is enabled, etc.
While any mode's setting screen is
ー
displayed
While illumination is turned on
ー
While the battery indicator is
ー
lower
Note that the watch also may enter
●
power saving if its face is blocked from
light by your sleeve while you are
wearing it.
Pairing the Watch with a
Phone
To connect the watch with a phone, first install
the CASIO "G-SHOCK Connected" app on the
phone and then use Bluetooth to pair the
watch with the phone.
● A Install the app on your phone.
Depending on your phone type, tap one of the
links below to install G-SHOCK Connected.
iOS (iPhone) Users
https://itunes.apple.com/us/app/g-shock-
connected/id1179983841?mt=8
Android TM (GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.gshockconnected
●
B Configure Bluetooth settings.
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
● C Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y On the Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Y Perform the operation shown on the
screen of the phone to be paired with.
or
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
Establishing a connection with a phone
●
causes the screen shown below to
appear on the watch.
7