Using Navigation
Starting Navigation
Holding down the rotary switch for about one
second starts a GPS positioning operation.
After startup of the positioning operation is
complete,
and then the navigation screen
will appear.
Positioning in progress
Positioning complete
Important!
Use navigation outdoors where the sky
●
is visible and not blocked by buildings,
trees, or other objects. For information
about suitable locations for receipt of
GPS signals, go to the section below.
Appropriate Signal Reception
l
Location
Keep the watch LCD pointed upwards
●
until startup of the positioning
operation is complete and the
navigation screen appears.
Operation Guide 3452
Note
You can also perform the steps below
●
to display the navigation screen.
A Press the rotary switch.
This displays the GPS Navigation
Mode setting screen.
B Rotate the rotary switch to move the
pointer to [NAVIGATION].
C Press the rotary switch.
This starts route recording and
navigation.
The message [DATA FULL] will
●
appear when remaining memory
capacity is low. Pressing the rotary
switch will start navigation, and
overwrite the oldest log in memory. If
you want to delete a different log or if
all logs are protected, press (C) to stop
navigation and then delete the desired
data.
Editing the Navigation Use History
l
If memory becomes full or if the
●
allowable continuous measurement
time is exceeded while a navigation
operation is in progress, navigation will
stop and the watch will return to the
Timekeeping Mode.
Interpreting GPS Navigation
●
Information
A Memory usage
B Actual route
C Scale
Rotary Switch
D Log acquisition status
: Log information being acquired
: Log information not being acquired
E Navigation indicators
: Current location
: Start point
S
: Destination (Goal)
G
to
1
F Route to destination
G Elapsed time
* Displayed only when a destination and
waypoints are specified.
Note
Waypoints and a route can be
●
specified using G-SHOCK Connected
only.
You can estimate approximately how
●
much longer navigation functions can
be used based on memory usage and
elapsed time.
①
⑤
②
⑥
③
⑦
④
Used
Unused
*
: Waypoints
*
9
*
13