Casio 3452 Operation Manual page 33

Changing the Timekeeping
Mode Display Configuration
Changing Displayed Information
You can configure watch settings to have the
current time in the Timekeeping Mode
displayed along with one other type of
information.
BASIC: Current Time Only (Basic Screen)
TIME+NAVIGATION: Current Time +
Navigation
TIME+BAROMETER: Current Time +
Barometric Pressure
While this screen is selected, entering the
Timekeeping Mode will cause the current
barometric pressure value and a graph of the
last 12 hours of barometric pressure readings
to be shown at the top of the display for one
hour. After one hour, only a graph of the last
48 hours of barometric pressure readings
(without the current value) will be shown.
First 12 hours After 12 hours
TIME+SUNRISE: Current Time + Sunrise/
Sunset Times
Operation Guide 3452
TIME+WORLD TIME: Current Time +
World Time
Note
The watch automatically returns to the
●
BASIC screen whenever the battery
indicator is
1.
Press (A).
This displays the Timekeeping Mode
setting screen.
2.
Rotate the rotary switch to move the
pointer to [DISPLAY].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to [SCREEN].
5.
Press the rotary switch.
6.
Rotate the rotary switch to move the
pointer to the setting you want.
7.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
8.
Press (C) to exit the setting screen.
or lower.
Rotary Switch
Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Press (A).
This displays the Timekeeping Mode
setting screen.
2.
Rotate the rotary switch to move the
pointer to [DISPLAY].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to [12/24H].
5.
Press the rotary switch.
6.
Rotate the rotary switch to select [12H]
(12-hour timekeeping) or [24H] (24-hour
timekeeping).
7.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
8.
Press (C) to exit the setting screen.
While 12-hour timekeeping is selected,
●
[P] will be displayed for p.m. times.
Using Alarms
The watch will beep when the alarm time is
reached. You can set up to four different
alarms.
When snooze is enabled for an alarm, it will
●
sound every five minutes up to seven times.
The beeper is muted in the cases described
●
below.
While the battery indicator is
ー
When watch is at Level 2 power saving
ー
Power Saving Function
l
Rotary Switch
or lower
33