Button Operations; Mode Overview - Casio 3452 Operation Manual

Before Getting
Started...
This section provides an overview of your
watch and explains how to connect with a
phone. You can configure watch settings to
connect with a phone at preset times each day
and adjust its time settings in accordance with
information obtained from a network time
server. You can also change the watch's time
settings manually and configure other watch
settings from the phone.
Important!
This watch is not a special-purpose
●
measuring instrument. Measurement
function readings are intended for
general reference only.
The watch's Altimeter Mode calculates
●
and displays relative altitude based on
barometric pressure readings
produced by its pressure sensor.
Because of this, altitude values
displayed by the watch may be
different from your actual elevation
and/or sea level elevation indicated for
the area where you are located.
Regular calibration in accordance with
the local altitude (elevation)
indications is recommended.
Altitude Measurement
l
Whenever using the Digital Compass
●
of this watch for serious trekking,
mountain climbing, or other activities,
be sure always to take along another
compass to confirm readings. If the
readings produced by the Digital
Compass of this watch are different
from those of the other compass,
perform 3-point calibration of the
Digital Compass to ensure better
accuracy.
Compass readings and calibration
ー
will not be possible if the watch is in
the vicinity of a permanent magnet
(magnetic accessory, etc.), metal
objects, high-voltage wires, aerial
wires, or electrical household
appliances (TV, computer,
cellphone, etc.)
Digital Compass
l
Some of the functions of this watch
●
cannot be used unless it is connected
with a phone. You should also leave
the phone's location information
setting turned on. Otherwise, the
phone will not be able to acquire
latitude and longitude information,
which may cause the watch to display
incorrect information.
The GPS navigation log data
●
acquisition operation can cause
deviation of the measurement intervals
of other modes.
Operation Guide 3452
Note
Note that the watch illustrations in this
●
manual are intended for reference
only. The actual watch may appear
somewhat different than depicted in
the illustrations.

Button Operations

A button
Press to display the setting screen of the
current mode.
B button
Press to turn on illumination.
C button
Press to display the mode selection screen.
Hold down for about one second to return to
the Timekeeping Mode.
Pressing (C) while a setting screen is
displayed will go back one screen.
D button
Pressing in the Timekeeping Mode displays
the auto time adjustment selection screen.
Rotary Switch
Press in any mode to display the navigation
screen.
Pressing this switch while a setting screen is
displayed applies a selected setting or a
setting change.
Rotating this switch while a setting screen is
displayed scrolls through available menu
items.

Mode Overview

This section provides an overview of the
modes of your watch.
Mode Overview
●
GPS Navigation Mode
Use this mode to record routes that you travel
and to check the bearing to your destination.
You can also record your current location in
watch memory.
GPS Navigation
l
Rotary Switch
Timekeeping Mode
This mode shows the current time and date.
You can also use it to configure Home City,
alarm, and other basic timekeeping settings.
Communication Mode
Use this mode to connect with a phone. You
can transfer watch data to a phone, and
configure watch settings with a phone.
Connecting the Watch with a Phone
l
Digital Compass Mode
Use this mode to take direction and bearing
angle readings.
Digital Compass
l
3