Other Settings
Getting ready
Enter the Timekeeping Mode.
Navigating Between Modes
l
Configuring Home City and
Summer Time Settings
If you move to another time zone, you can
have the watch indicate the current time there
by simply changing the Home City and
summer time settings.
Setting a Home Time City
●
Use the procedure in this section to select a
city to use as your Home City.
1.
Press (A).
This displays the Timekeeping Mode
setting screen.
2.
Rotate the rotary switch to move the
pointer to [HOMECITY].
3.
Press the rotary switch.
4.
Rotate the rotary switch to move the
pointer to the city you want to use as your
Home City.
5.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
6.
Press (C) to exit the setting screen.
Operation Guide 3452
Configuring the Summer Time Setting
●
If you are in an area that observes summer
time, you can also enable or disable summer
time.
Note
The initial factory default summer time
●
setting for all cities is "AT (AUTO)". In
many cases, the "AT (AUTO)" setting
lets you use the watch without
switching between summer time and
standard time.
In the cases described below,
●
receiving GPS position information will
automatically cause "AT (AUTO)" to be
selected for the summer time setting.
When the time zone of the current
ー
receive operation is different from
the watch's time zone setting prior to
the receive operation.
When the time zone is unchanged,
ー
but the acquired position information
is for a geographic area with
different summer time rules (start
date, end date)
1.
Press (A).
Rotary Switch
2.
Rotate the rotary switch to move the
pointer to [DST].
3.
Press the rotary switch.
This displays the Timekeeping Mode
setting screen.
4.
Rotate the rotary switch to select a
summer time setting.
[AUTO]: The watch switches between
●
standard time and summer time
automatically.
[STD]: The watch always indicates
●
standard time.
[DST]: The watch always indicates
●
summer time.
5.
Press the rotary switch to exit the setting
screen.
This returns to the Timekeeping Mode
setting screen.
6.
Press (C) to exit the setting screen.
Manual Time Adjustment
You can use the procedure below to adjust the
watch's time and day settings when GPS
signal reception or communication with a
phone is not possible for some reason.
1.
Press (A).
This displays the Timekeeping Mode
setting screen.
2.
Rotate the rotary switch to move the
pointer to [TIME&DATE].
3.
Press the rotary switch.
4.
Use the operations below to configure the
time and date settings.
Rotate the rotary switch to change the
●
underlined value.
Use (D) to move the underlining
●
between values. Each press of (D)
moves the underlining in the following
sequence: hour n minute n year n
month n day.
Note
The seconds start normal timekeeping
●
Rotary Switch
from 00 when you press the rotary
switch in step 5, below. If you want the
seconds count to be more exact,
adjustment using GPS signal
reception or connection with a phone
is recommended.
5.
Press the rotary switch to exit the setting
screen.
6.
Press (C) to exit the setting screen.
Rotary Switch
32