Enterprise Settings; Logging; Sip Registration; Wireless - SpectraLink SL8440 Deployment Manual

Spectralink 84-Series Wireless Telephones Deployment Guide with CMS
plumbing and hardware but supervisors must monitor all channels. In another example,
a hospital setting may require different PTT channels for maternity and ICU nurses while
facilities staff could be assigned to completely separate channels and all supervisors
monitor all channels. A phone can only belong to one Group.
If using Groups, read through the Flat scenario first and then see the special configuration
parameters we have provided to Groups.
Both scenarios require the same infrastructure setup. These are your Enterprise settings.
Both scenarios require you to identify each phone you will be deploying.
The Groups scenario requires you to identify each group and which phone belongs to which
group. Note that a phone can belong to only one group.
•
Identifying the groups
•
Identifying the phones in the groups
•
Identifying which features belong to which groups

Enterprise Settings

At the Enterprise level you would typically set every parameter used by every phone. Wireless
parameters are set by QNC and apply to every phone for initial wireless provisioning.
The Batch file provisions every phone with the call server address and port number.
Remaining Enterprise settings are set within the CMS pages for all phones on Configuration
pages:

Logging

Global Log Settings
Module Log Level Limits

SIP Registration

Message Center
Server Settings

Wireless

721-0048-000_B.docx
February 2018 23