GRAPHTEC midi LOGGER GL240 Quick Start Manual page 10

8
. START/STOP (USB DRIVE MODE)
Push the [START/STOP] key to initiate start and stop of a recording when GL240 is
in the Free Running mode.
If the key is pushed while turning the power to the GL240 on, the unit will switch
from the USB connection to USB DRIVE mode.
* For more information about the Drive Mode of the USB, refer to the User's Manual in the supplied
CD.
9
. DISPLAY
Push the [DISPLAY] key
Waveform + Digital
Expanded Waveform
Digital + Calc
10
. REVIEW
Push the [REVIEW] key to replay recorded data. If the GL240 is in the Free
Running mode, data files that have already been recorded will be displayed. If the
GL240 is still recording data, the data is replayed in a 2-screen format. Press the
[REVIEW] button to switch between the recorded data and real time data.
* A data replay operation will not be performed if data has not been recorded.
11
. FILE
This is used to operate the internal memory (SD1) and SD memory card (SD2), or
for file operation, screen copy, and save/load carrent settings.
12
. CURSOR (ALARM CLEAR)
Push the [CURSOR] key to switch between the A and B cursors during data replay.
If the Alarm setting is specified as "Alarm Hold", push the key to clear the alarm.
The alarm settings are made in the "TRIG" menu.
8
Key Pointers
•
Waveform + Digital
Default screen when the GL240 is initially turned on with
both the waveforms and digital values.
The screen settings can be changed by using the
[SPAN/POSI/TRACE] key.
•
Expanded Waveform
Displays expanded waveforms only.
•
Digital + Calc
Displays large-size digital values and two types of
calculation processing results. The calculation settings are
made in the "DATA" menu.
Use the key or
(available digital channel displays:2,4,10).
* For more information, refer to the User's Manual in the
supplied CD.
key to switch digital display mode.