Engine Mount Installation - Seagull Models AT-6 TEXAN Assembly Manual

www.seagullmodels.com
M2 clevis.
M2 lock nut.
95 mm.
wing.
Electric Aileron
servo wire.
INSTALLATION THE PUSHROD.
Aileron.
60mm.
Wing
.
Wing
.
Aileron
.
Aileron
.
Wing.
4x30mm.
M2 lock nut.
Mark and drill 4 holes for engine mount.
Insert 4 blind nuts to firewall.
Thread locker glue.
Aileron.
Repeat the procedure for the other wing
half.

ENGINE MOUNT INSTALLATION.

See pictures below.Make yourself the
template of your engine on paper.
11