Relational Functions Range - GE VersaMax PLC User Manual

Input/ Output
IN2
Q
%I0001
PWR_MDE
BIN_FUL
172 GFK-1503E
For public disclosure
Choices
R, AI, AQ, constant
For INT data only: I, Q,
M, T, G
flow, none
10.6.1.2 Example
In the example, two double precision signed integers are tested for equality. When the
relay %I0001 passes power flow to the LE (Less or Equal) function, the value presently in
the reference nicknamed PWR_MDE is compared to the value presently in the reference
BIN_FUL. If the value in PWR_MDE is less than or equal to the value in BIN_FUL, coil
%Q0002 is turned on.
LE_
INT
IN1 Q
IN2

10.6.2 Relational Functions Range

The Range function determines if a value is within the range of two numbers.
10.6.2.1 Data Types for the Range Function
The Range function operates on these types of data:
Signed integer (default).
INT
Double precision signed integer.
DINT
Word data type.
WORD
When the Range function is enabled, it compares the value of input IN against the range
specified by limits L1 and L2. Either L1 or L2 can be the high or low limit. When the
value is within the range specified by L1 and L2, inclusive, output parameter Q is set ON
(1). Otherwise, Q is set OFF (0).
Enable
Limit 1
Limit 2
Value to be compared
Description
IN2 contains a constant or reference for the
second value to be compared. IN2 must be a
valid number. Constants must be integers for
double precision signed integer operations.
IN2 is on the right side of the relational equation,
as in IN1 < IN2.
Output Q is energized when IN1 and IN2 match
the specified relation.
RANGE
INT
Output
L1 Q
L2
IN
%Q0002
VersaMax PLC User Manual