Table 13: Resolving An Error In The Receiver Status Word - Novatel OEM615 Installation And Operation Manual

Oem6 series, cards and enclosures
Hide thumbs Also See for OEM615:
Table of Contents

Advertisement

Troubleshooting
Bit Set
16
Monitor CPU idle time. Reduce number of logs or the rate of data logging
17
Ensure that the version log is consistent with the hardware
20
SoftLoad is in progress. See Section 8.4, Updating Using SoftLoad Commands on page 106
You may be exceeding the receiver's velocity limit. If so, reduce velocity. This error can only be
21
cleared by resetting the receiver
22
Reload firmware using WinLoad or the SoftLoad commands
31
Possible hardware failure. Contact Customer Support on page 18
Bit Set
Check the Error Word in the RXSTATUS log. See also Table 12, Resolving a Receiver Error Word
0
on page 99
Check temperature ranges in the ENVIRONMENTAL table sections of Technical Specifications
1
appendices
2
See Section 2.4, Power Supply Requirements on page 31
3
See Section 2.3, Selecting a GNSS Antenna on page 29, Section 2.3.1, Choosing a Coaxial Cable
4
on page 29, Section 2.3.3, Connecting the Antenna to the Receiver on page 30, Section 4.10.6,
5
Antenna LNA Power on page 77
6
Check the CPU idle time. Check for unnecessary logging. Check for simultaneous use of
7
functionality, for example, API and RTK
8
9
See Table 9, Serial Ports Supported on page 52
10
11
15-17
Reserved
When the receiver has tracked GNSS satellites long enough for a valid almanac to be received,
18
this bit will be set to 0.
19
None. This bit only indicates if the receiver has calculated a position.
None. This bit is a status bit indicating if the receiver's position has been manually fixed and does
20
not represent a problem. Refer also to the FIX command in the
Manual
None. This bit indicates if clock steering has been manually disabled. Refer also to the FRESET
21
command in the
OEM6 Family Installation and Operation User Manual Rev 12

Table 13: Resolving an Error in the Receiver Status Word

(OM-20000129)
OEM6 Family Firmware Reference Manual
Action to Resolve
Action to Resolve
(OM-20000129)
OEM6 Family Firmware Reference
Chapter 7
100

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OEM615 and is the answer not in the manual?

This manual is also suitable for:

Oem617Oem638Oem617dFlexpak6Flexpak6dOem628

Table of Contents

Save PDF