Lap Belt Installation - Britax ROUNDABOUT User Manual

BRITAX Child Safety, Inc.

Lap Belt Installation

1. Remove the tether from
the pouch and place it
up and over the child
seat back.
2. Adjust this child seat to
position 1 or 2 and place
forward-facing on the
vehicle seat (see page
25). Ensure that no more
than 20% or 3 in. (7.6 cm)
of the base hangs over
the edge of the vehicle
seat.
IMPORTANT:
child seat in position 1
with a child over 40 lbs
(18 kg).
IMPORTANT:
seat may not perform as
intended if the base of the
child seat is not flat on the
vehicle seat.
3. Loosen the harness.
a. Lift harness adjuster
b. Remove the infant
4. Lift the back cover,
then pull the seat cover
forward to access the
forward-facing belt path.
5. Route the vehicle belt
through the forward-facing
belt slots, ensuring the
vehicle belt is not twisted,
then buckle.
IMPORTANT:
use lock-offs for lap belt
installations.
6. Push down on the middle
of the child seat while
pulling the vehicle belt to
remove all slack.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
18
Roundabout G4_1.indb 18
Use this
Your child
lever and pull both
harness straps
forward.
positioning pillow
and unbuckle the
harness.
Do not
3"
9/23/2014 8:43:38 AM