Lap-Shoulder Belt Installation - Britax ROUNDABOUT User Manual

BRITAX Child Safety, Inc.

Lap-Shoulder Belt Installation

1. Loosen the harness.
a. Lift harness adjuster
b. Remove the infant
2. Recline the unoccupied
child seat to position 3
and place rear-facing on
the vehicle seat (see page
25).
3. Pull the seat cover
forward to access the
rear-facing belt path.
4. Open the blue lock-
off closest to where
the vehicle belt will be
buckled.
a. Open the locking tab.
b. Open the clamp.
5. Route the vehicle belt
through the rear-facing
belt slots, ensuring the
vehicle belt is not twisted,
and buckle the seat belt.
NOTE: The buckle should
be in the inner slot and
lying away from the belt
path.
6. Push down into the
middle of the child
seating area with
moderate force while
removing all slack from
the bottom (lap) part of
the vehicle belt and close
the lock-off, if used (see
page 24).
IMPORTANT:
vehicle lap and shoulder
belts must be routed
through the lock-off.
10
Roundabout G4_1.indb 10
lever and pull both
harness straps
forward.
positioning pillow
and unbuckle the
harness.
Both the
4b
4a
Locking
Tab
Clamp
9/23/2014 8:43:33 AM