Britax ROUNDABOUT User Manual page 31

3. Thread the loop at one
end of the strap through
the loop at the other end
and pull until the strap is
tight.
4. Use the open loop as an
attachment point for the
tether.
NOTE: Store the tether
connector strap in the
tether pouch when not in
use.
Using the Tether
To attach the tether to a tether anchor:
1. Firmly press the hook over
the tether anchor point.
2. Pull the loose end of the
webbing to remove slack
from the tether.
NOTE: If the tether is
too short for use in your
vehicle, contact BRITAX
Consumer Services at
1-888-427-4829 or 1-704-
409-1699 to obtain a tether
extender.
To remove the tether from a tether anchor:
1. Loosen the tether.
a. Tilt the lock up.
b. Pull the tether webbing.
2. Remove the tether hook
from the tether anchor.
Roundabout G4_1.indb 29
ROUNDABOUT User Guide
a
b
29
9/23/2014 8:43:46 AM