Britax ROUNDABOUT User Manual page 13

7. Push down into the middle
of the child seating area
with moderate force while
pulling the top (shoulder)
part of the belt between
the belt slots to remove
any remaining slack
through the lock-off.
8. Replace the seat cover.
NOTE: Rear-facing
installations can be
improved by the use of
the tether (see page 28).
Rear-Facing Installation with Lap-Shoulder Belt
9 Check that all connections are secure and straps are not
twisted.
9 Check that the child seat cannot be moved front to back
or side to side more than 1 in. (2.5 cm) at the belt path.
If the child seat is not secure, repeat installation or use a
different seating location.
9 Check that the back angle of the child seat is 30° – 45°
from vertical (not to exceed 45°) when the car is parked
on a level surface. See "Seat Positions" on page 25.
Roundabout G4_1.indb 11
ROUNDABOUT User Guide
a
or
b
11
9/23/2014 8:43:34 AM