Britax ROUNDABOUT User Manual page 41

3. Guide the buckle retainer
up through the slot in the
child seat shell to remove.
Cleaning the Harness Buckle
• THOROUGHLY RINSE the buckle using warm water.
• TEST THE BUCKLE by fastening and unfastening until a
click is heard after inserting each buckle tongue. If clicks
are not heard, repeat the cleaning procedure.
• TOWEL DRY.
• DO NOT:
– Soak
– Lubricate
– Use solvents
– Use soap or household detergents
Replacing the Harness Buckle
• For rear-facing installation:
– ALWAYS position the buckle in
the inner slot for when using a
vehicle seat belt installation.
– The vehicle belt must pass in
front of the buckle strap.
– Position the buckle in the slot
closest to but not under the
child when using the LATCH installation.
• For forward-facing installation, use the outer buckle
slot when installing the child seat with a child weighing
30 lbs (13.6 kg) and above or if the buckle is under
the child in the inner position.
• NEVER leave the buckle in the adjustment slot
1. Guide the buckle retainer
down through the slot in
the child seat shell.
Roundabout G4_1.indb 39
ROUNDABOUT User Guide
ADJUSTMENT
SLOT
39
9/23/2014 8:43:53 AM