Table of Contents
Advertisement
Available languages
Available languages
Britax Child Safety, Inc.
Rear-Facing Installation
Lap-Shoulder Belt Installation (Preferred Method)
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 30).
3. Recline the unoccupied
child seat and place rear
facing on the vehicle seat.
NOTE: Ensure that no
more than 7.5 cm (3 in.)
of the base hangs over
the edge of the vehicle
seat (see page 29).
4. Slide both the lap and
shoulder parts of the
vehicle belt into the rear-
facing belt slots.
5. Buckle seat belt.
NOTE: Ensure the vehicle
belt is not twisted.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
10
Table of Contents
1a
1b
7.5 cm
6b
6a
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
7. Hold harness straps up
and away from seat while
closing the CLICKTIGHT.
NOTE: A click helps
confirm the CLICKTIGHT
is secure.
Rear-facing Installation with Lap-Shoulder Belt
9 Logo on the CLICKTIGHT dial has returned to a horizontal
position.
9 All connections are secure and vehicle belt is not twisted.
9 Both vehicle lap and shoulder belts are routed through
CLICKTIGHT.
9 Child seat base is be flat on vehicle seat and is parallel to
vehicle seat.
9 Anti-rebound bar is properly installed (see page 30).
9 Recline indicator ball is within the allowable blue section for
the size of the child and that no more than 7.5 cm (3 in.) of
the base hangs over the edge of the vehicle seat (see page
28).
9 Child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat
is not secure, repeat installation or use a different seating
location.
Table of Contents
11
Advertisement
Table of Contents
