Troubleshooting - Britax ROUNDABOUT User Manual

Troubleshooting

The harness is
hard to adjust�
The adjuster
strap is fraying
at the sides�
The buckle will
not fasten with
a click after
each tongue is
inserted�
Please contact BRITAX Consumer Services at 1-888-427-
4829 or 1-704-409-1699 if you have an issue not listed
here.
Roundabout G4_1.indb 41
Problem
ROUNDABOUT User Guide
Possible Solution
The yoke may be caught on the
tether webbing or other component
of the child seat. Remove the
obstruction and try adjusting the
harness again. Always store the
tether in the pouch provided when
not in use. When the tether is in use,
always secure excess webbing in the
elastic strap. See page 28.
The vehicle seat back may hinder
harness adjustment. Ensure the child
seat base is flat on the vehicle seat.
The harness may be at maximum
or minimum height or the harness
may be too tight to adjust. Check for
and correct where necessary and try
adjusting the harness again.
Pull the harness adjuster strap up and
away from the child seat to tighten.
Do not pull sideways. Doing so may
cause the harness adjuster strap to
fray at the sides. See page 21.
There may be debris in the buckle
mechanism. Clean the buckle (see
page 39), then try fastening the
buckle again.
41
9/23/2014 8:43:54 AM