Britax ROUNDABOUT User Manual page 23

7. Fasten the harness
buckle. Proper
connection is confirmed
with a click after inserting
each buckle tongue.
8. Check for proper harness
height and pull any
excess slack up to the
child's shoulder area
before tightening.
9. Pull the harness adjuster
strap to tighten the
harness.
NOTE: The harness
should have a snug fit
around the child. A snug
strap should not allow any
slack. It lies in a relatively
straight line without
sagging. It does not press
on the child's flesh or
push the child's body
into an unnatural position.
You should not be able to
pinch excess.
10. Fasten the chest clip.
NOTE: The correct height
for the chest clip is at the
middle of the chest at
armpit level.
Before traveling, verify that the:
9 Harness straps are not twisted.
9 Harness is snug.
9 Buckle is fastened.
9 Chest clip is at the child's armpit level.
Roundabout G4_1.indb 21
ROUNDABOUT User Guide
Pull the harness adjuster strap
up and away from the child seat
to tighten�
Do not pull sideways�
21
9/23/2014 8:43:41 AM