BRITAX Child Safety, Inc.
Child Seat Functions
Adjusting the Harness Height
• In rear-facing mode, the harness straps should be
in the closest position at or below your child's
shoulders. See page 7.
• In forward-facing mode, the harness straps should
be in the closest position at or above your child's
shoulders. See page 7.
1. Loosen the harness.
a. Lift harness adjuster
b. Pull both harness
2. Unhook both harness
straps from the yoke.
3. Pull one harness strap
through the shell and
cover to the front of the
child seat.
4. Feed the harness strap
through the desired
harness slot in the cover
and shell to the back of
the child seat.
NOTE: Repeat steps 3
and 4 for second harness
strap.
5. Nest the harness straps
by inserting the right strap
loop into the left strap
loop.
22
Roundabout G4_1.indb 22
lever.
straps forward.
1b
1a
9/23/2014 8:43:41 AM