BRITAX Child Safety, Inc.
Lap Belt Installation
1. Loosen the harness.
a. Lift harness adjuster
b. Remove the infant
2. Recline the unoccupied
child seat to position 3
and place rear-facing on
the vehicle seat (see page
25).
3. Pull the seat cover
forward to access the
rear-facing belt path.
4. Route the vehicle belt
through the rear-facing
belt slots, ensuring the
vehicle belt is not twisted
and buckle the seat belt.
NOTE: The buckle should
be in the inner slot and
lying away from the belt
path.
IMPORTANT:
use lock-offs for lap belt
installations.
5. Push down on the middle
of the child seat while
pulling the vehicle belt to
remove all slack.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
12
Roundabout G4_1.indb 12
lever and pull both
harness straps
forward.
positioning pillow and
unbuckle the harness.
Do not
9/23/2014 8:43:34 AM