Forward-Facing Installation; Lower Anchor Installation - Britax ROUNDABOUT User Manual

BRITAX Child Safety, Inc.

Forward-Facing Installation

Lower Anchor Installation

IMPORTANT:
anchors for a child weighing more than 50 lbs (22.7 kg).
1. Remove the lower
connectors from the
storage slots in the
base. Press the adjuster
release button and pull
the lower connector
strap to full length.
Repeat for the second
strap.
2. Remove the tether from
the pouch and place it
up and over the child
seat back.
3. Adjust this child seat to
position 1 or 2 and place
forward-facing on the
vehicle seat (see page
25). Ensure that no more
than 20% or 3 in. (7.6 cm)
of the base hangs over
the edge of the vehicle
seat.
IMPORTANT:
seat may not perform as
intended if the base of the
child seat is not flat on the
vehicle seat.
4. Firmly press the lower
connectors onto the
adjacent lower anchors.
a. A click confirms
b. Verify that the lower
5. Push the child seat down
while pulling each lower
connector strap to tighten.
14
Roundabout G4_1.indb 14
Do not install forward-facing with the lower
Your child
attachment.
connector strap is
not twisted.
3"
9/23/2014 8:43:35 AM