Table of Contents
Advertisement
Available languages
Available languages
Britax Child Safety, Inc.
Forward-Facing Installation
IMPORTANT:
Do not use the anti-rebound bar in a forward-
facing position.
Lap-Shoulder Belt Installation (Preferred Method)
1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place upright forward-
facing on the vehicle seat.
NOTE: Ensure that the
base of the child seat is
flat on the vehicle seat
and no more than 7.5 cm
(3 in.) of the base hangs
over the edge of the
vehicle seat (see page
29).
3. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
4. Slide both the lap and
shoulder parts of the
vehicle belt into the
forward-facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the vehicle
belt is not twisted and
buckle the seat belt.
6. Remove slack from the
lap part (A), then the
shoulder part (B) of the
vehicle belt.
16
Table of Contents
7. Hold harness straps up
8. Attach the tether to a
Forward-Facing Installation with Lap-Shoulder Belt
7.5 cm
3a
3b
6b
6a
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
and away from seat while
closing the CLICKTIGHT.
NOTE: A click helps
confirm the CLICKTIGHT
is secure.
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 33).
9 Logo on the CLICKTIGHT dial has returned to a horizontal
position.
9 All connections are secure and vehicle belt is not twisted.
9 Both vehicle lap and shoulder belts are routed through
CLICKTIGHT.
9 Child seat base is be flat on vehicle seat and is parallel to
vehicle seat.
9 Recline indicator ball is within the allowable blue section for
the size of the child and that no more than 7.5 cm (3 in.) of
the base hangs over the edge of the vehicle seat (see page
28).
9 Child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat
is not secure, repeat installation or use a different seating
location.
9 Excess top tether webbing is contained within your vehicle
and secured.
9 The anti-rebound bar is removed.
Table of Contents
17
Advertisement
Table of Contents
