Introduction; Site Preparation Requirements; User Documentation - Agilent Technologies 700 Series User Manual

Introduction

2 Introduction
Site Preparation Requirements
User Documentation
Specifications
Electrical Power Supplies
Other Connections
Gas Supplies
Water Chiller System
Exhaust System
ICP-OES instrument cooling air supply
Drain Vessel

Site Preparation Requirements

Prior to receiving your instrument, you will have been provided with an Agilent 700
Series ICP Optical Emission Spectrometer Site Preparation Guide, which describes
the environmental and operating requirements of the ICP-OES system. You must
prepare your laboratory according to these instructions before the ICP-OES can be
installed. You should keep the Site Preparation Guide for future reference for
example, if you plan to move your instrument. If you have misplaced your copy,
you can obtain a free replacement from your local Agilent office.
Position the equipment for easy access to the disconnecting switch on the rear of
the instrument.

User Documentation

You have been provided with the following documentation to help you set up and
operate your Agilent ICP-OES system:
This User's Guide, with safety practices and hazards information, instructions

for finding information about installing and maintaining the components of the
ICP-OES and a brief operation overview.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
17
17
18
19
19
19
21
21
22
22
17