Consumables; Troubleshooting; Spare Parts - Agilent Technologies 700 Series User Manual

Maintenance and Troubleshooting
The exterior surfaces of the ICP-OES should be kept clean. All cleaning should be
done with a soft cloth. If necessary, this cloth can be dampened with water or a
mild detergent. Do not use organic solvents or abrasive cleaning agents.
Before using any cleaning agent, procedure or decontamination method except
those specified by Agilent, the user (or other authorized personnel) should check
with your local authorized Agilent field service engineer or representative to
confirm that the proposed method will not damage the equipment.

Consumables

For information on maintaining consumables (such as replacing the torch,
cleaning the cone, replacing the peristaltic pump tubes and replacing fuses), refer
to the Help. Specifically:
1 Click Start > All Apps > ICP Expert II > ICP Expert II Help.
2 When the ICP Expert II Help appears, click Maintenance to view step-by-step
instructions on how to maintain instrument consumables.

Troubleshooting

For troubleshooting information, please see the ICP Expert II Help:
1 Click Start > All Apps > ICP Expert II > ICP Expert II Help.
2 When the ICP Expert II Help appears, click Troubleshooting to view instructions
on how to troubleshoot.

Spare Parts

For spare parts and consumables ordering information, refer to the Agilent
Technologies website:
www.agilent.com
42 Agilent 700 Series ICP Optical Emission Spectrometers User's Guide