Maintenance And Troubleshooting - Agilent Technologies 700 Series User Manual

Maintenance and Troubleshooting

5 Maintenance and Troubleshooting
Routine Maintenance
Induction Coil Maintenance
Cleaning
Consumables
Troubleshooting
Spare Parts
This chapter includes the Agilent 700 Series ICP optical emission spectrometer
maintenance requirements that may be carried out by an operator. Any
maintenance procedures not specifically mentioned in this chapter should be
carried out only by Agilent-trained, Agilent-qualified or Agilent-authorized field
service engineers.
Eye Hazard
WARNING
Danger to eyes. The plasma is an intense light source. Direct viewing of the
light source will cause eye damage. Operators and other unauthorized
personnel must NEVER remove the main covers or disable the safety
interlock system.
Shock Hazard
WARNING
This instrument contains electrical circuits, devices and components
operating at dangerous voltages. Contact with these circuits, devices and
components can result in death, cause serious injury, or painful electrical
shock.
RF Hazard and Hot surfaces
WARNING
The plasma radiates dangerous levels of radio frequency (RF) energy.
Exposure to the RF energy can cause severe skin damage and cataracts of
the eyes, while close contact with the operating plasma can result in severe
heat burns to the skin, and an electrical discharge which can jump a
considerable distance and may cause death, severe electric shock or sub-
surface skin burns.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
38
39
41
42
42
42
37